Energy Savings Improves Efficiency and Profit

044 - 2476 8113

Cable Supporting System

Cable Supporting System

  • Perforated cable tray, wire mesh and ladder type tray made up of GI.
  • Wall trunking PVC for cable rooting.
  • Under floor system PVC ducts, Junction boxes and service outlet boxes.
  • PVC & metal clamps for conduit and cable rooting.

Walkable cable tray system BKRS

  • Foot-sure through day-to-day industrial work
  • Be it in the automotive industry or in plant construction – with the heavy, walk-on cable tray system BKRS OBO is expanding its range for electrical installations linked to automated production lines. The new system with base perforation has a side height of 110 millimetres. In addition, the tray has connector perforations on both ends. The trays’ covers are non-slip, stable and strengthened with profiled sheet metal, and provide the perfect surface for harsh industrial conditions. In combination with the cover, the walk-on cable tray has a magnetic shield insulation of 50 dB, without cover 20 dB.
  • Extensive system accessories such as connectors, dust protection components, guard plates, barrier strips and fastening material complete the range and ensure a flexible and installation-friendly system.
  • PVC & metal clamps for conduit and cable rooting.

Magic system – variable bends

One component for all radii up to 90 degrees – with these new variable bends you are more flexible than ever.

Never before has it been so easy to route OBO cable trays around corners and bends.

Never before has it been so easy to route OBO cable trays around corners and bends. Thanks to the new bend’s variable construction it can now be fanned out to different radii and then be fastened into the required position without having to cut it. The new bend is universally available for all trays in the Magic range, in the finishes strip – galvanised, hot-dip galvanised and stainless steel. Optionally, it can be closed with a matching cover.

  • Variable for all radii up to 90 degrees
  • For all Magic cable tray systems
  • Strip-galvanised, hot-dip galvanised and stainless steel versions

The Magic straight connector provides the perfect connection

The Magic fittings connector: perfect connections for every application

The Magic fittings connector has two spring elements to each end for the connection of joints of all kinds of fittings. Perfect connections for every application:

  • The connection of two fittings,
  • The connection of a Magic tray with a Magic fitting,
  • The connection of cut trays and fittings.

OBO's well-known straight connector set is also used in this application.

Locking connection of tray with fitting

Locking connection of fittings with fitting connector

Locking connection of cut tray and fitting: A combination of fittings connector with straight connector set Magic straight connector

Hold-down clip on MS profile rail

All fixed with one clip

Mesh cable tray mounting made easy. Thanks to the new fastening clip, OBO’s mesh cable trays can now also be fastened onto MS profile rails without screws. This saves time and materials. With only a few steps, the clips are fastened and provide a secure connection onto the stainless steel MS profile rail. The fastening clips are not suitable for vertical installation.

Thanks to the new fastening clip, OBO’s mesh cable trays can now also be fastened onto MS profile rails without screws.

Hold-down clip

installation of hold-down clip on MS profile rail

Screw in

Our industrial service poles bundle power, data and compressed-air connections in a compact and sturdy manner.

Our industrial service poles bundle power, data and compressed-air connections in a compact and sturdy manner. This means that, for instance, the adjustment of production processes becomes very quick and easy when locations are changed. Thanks to the modular set-up, it is easy to equip the service pole according to the new requirements.

In order to be able to install cables and wires of different voltage levels, it is possible to divided the installation space with a partition.

Our industrial service poles bundle power

Device installation

ISS industrial poles can be equipped with practically standard systems. The 76.5 mm-wide system opening is ready for the installation of:

  • Switching and connection devices
  • CEE connection units 16A/32 A
  • Data technology
  • Series-mounted devices

Flexible use

In order to be able to install cables and wires of different voltage levels, it is possible to divided the installation space with a partition.

install cables and wires of different voltage levels

Channel rail

The channel rail provides the option to attach

  • Monitors
  • Keyboards
  • Reading, transmitting and receiving equipment
  • Fixed or flexible pipelines for compressed air or gasses

Compressed air tap

Tap to take off compressed air from the ISS industrial pole profile. The compressed air tap can be mounted onto the pole profile using slot nuts and fastening screws.

Perfect connection to the building and the electrical infrastructure.

Stand and ceiling fastening
A solid stand that is fastened to the floor ensures secure mounting. A solid ceiling fastening at the top can easily be adjusted to different heights.

Connection to walk-on cable tray and support systems
With our walk-on cable tray systems, you can feed power and data into power poles. Using the appropriate brackets, cable ladder and cable tray systems can be attached to the pole easily and firmly.

A solid stand that is fastened to the floor ensures secure mounting

Enquiry
close slider
1 Step 1
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
FormCraft - WordPress form builder